Yamaha RX-V2600 Owner's Manual - Page 128
Tuner, XM Satellite Radio, Problem, Cause, Remedy, Status message - buzzing
UPC - 027108924397
View all Yamaha RX-V2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
TROUBLESHOOTING ■ Tuner Problem Cause Remedy FM stereo reception is noisy. The characteristics of FM stereo broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. Check the antenna connections. Try using a high-quality directional FM antenna. Use the manual tuning method. There is distortion, and There is multipath interference. clear reception cannot be obtained even with a FM good FM antenna. Adjust the antenna position to eliminate multipath interference. The desired station cannot be tuned in with the automatic tuning method. The signal is too weak. Use a high-quality directional FM antenna. Use the manual tuning method. Previously preset stations can no longer be tuned in. This unit has been disconnected for a Preset the stations again. long period. The desired station cannot be tuned in with the automatic tuning method. The signal is weak or the antenna connections are loose. Tighten the AM loop antenna connections and orient it for the best reception. Use the manual tuning method. AM There are continuous crackling and hissing noises. Noises result from lightning, fluorescent lamps, motors, thermostats and other electrical equipment. Use an outdoor antenna and a ground wire. This will help somewhat, but it is difficult to eliminate all noise. There are buzzing and whining noises. A TV set is being used nearby. Move this unit away from the TV. See page 29 48 - 29 48 48 - 48 - - ■ XM Satellite Radio If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel display. In this case, read the cause and follow the corresponding remedies. Status message Cause Remedy See page CHECK ANTENNA The XM Connect-and-Play digital antenna accessory is not connected, or does not work properly. Check the XM Connect-and-Play digital antenna accessory connections. 53 UPDATING NO SIGNAL The XM user encryption code is being updated. Wait until the encryption code is updated. - The signal is too weak. Check the XM Connect-and-Play digital antenna accessory connections and orient it for the best 53 reception. LOADING It takes longer than four seconds for audio or text data to be decoded. Wait until the decoding process has finished. - OFF AIR - - - The XM Satellite Radio channel you selected is not currently broadcasting any signal. Check the channel number again or select another XM Satellite Radio channel. 57 The channel Station ID (SID) is no longer available. --- / --- No artist name/feature or song/program title is available. - - - No channels are available for the selected category. Select another channel category by pressing CATEGORY (or A-E/CAT. l / h on the remote control) repeatedly. 57 124