Yamaha RX-V2600 Owner's Manual - Page 106
U.S.A. model only, Wake on RS-232C access - remote control code
UPC - 027108924397
View all Yamaha RX-V2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
ADVANCED SETUP ■ Remote sensor REMOTE SEN Use to activate or deactivate the signal-receiving capability of the remote control sensor on the front panel of this unit. Choices: ON, OFF • Select ON if you want to activate the signal-receiving capability of the remote control sensor. • Select OFF if you want to deactivate the signal- receiving capability of the remote control sensor. Note We recommend setting this parameter to ON in most cases. ■ Wake on RS-232C access WAKE ON 232C Use to set this unit to transmit data via the RS-232C interface when this unit is in the standby mode. Choices: Y (yes), N (no) • Select Y set this unit to transmit data via the RS-232C interface. • Select N set this unit not to transmit data via the RS-232C interface. ■ Remote control AMP ID REMOTE AMP Use to set the AMP ID of this unit for remote control recognition (see page 106). Choices: ID1, ID2 • Select ID1 when the remote control AMP library code is set to 2001. • Select ID2 when the remote control AMP library code is set to 2002. Note You need to set the corresponding remote control code for the remote control. ■ Remote control tuner ID REMOTE TUN Use to set the tuner ID of this unit for remote control recognition (see page 106). Choices: ID1, ID2 • Select ID1 when the remote control tuner library code is set to 2602. • Select ID2 when the remote control tuner library code is set to 2603. Note You need to set the corresponding remote control code for the remote control. ■ Remote control XM ID REMOTE XM (U.S.A. model only) Use to switch the XM-related remote control codes between ID1 and ID2. Choices: ID1, ID2 • Select ID1 when the remote control XM library code is set to 2604. • Select ID2 when the remote control XM library code is set to 2605. Note You need to set the corresponding remote control code for the remote control. ■ Fan operation mode FAN MODE Use to set the operation of the cooling fan of this unit. Choices: AUTO, CONT. • Select AUTO to set the fan to operate automatically according to the temperature of this unit. • Select CONT. to set the fan to operate continuously regardless of the temperature of this unit. ■ Tuner frequency step TU (Asia and General models only) Use to set the tuner frequency step according to the frequency spacing in your area. Choices: AM10/FM100, AM9/FM50 • Select AM10/FM100 for North, Central and South America. • Select AM9/FM50 for all other areas. ■ Bi-AMP BI-AMP Use to activate or deactivate the bi-AMP function. Choices: ON, OFF • Select ON if you want to activate the bi-AMP function. • Select OFF if you want to deactivate the bi-AMP function. Note When BI-AMP is set to ON, the SURROUND BACK terminals cannot be used to connect surround back speakers in that the SURROUND BACK terminals are already used for the bi-AMP connection (see page 19). ■ Video reset V-RESET Use to initialize the parameter settings for Dimmer in the Option menu (see page 95). This feature is useful if the SET MENU items are not displayed on your video monitor due to a technical error between the CMPNT I/P setting and the capability of your video monitor. That is, if your video monitor does not support the analog video signals with 480p of resolution, the SET MENU items may not be displayed on your video monitor when Component I/P is set to On (see page 88). Choices: YES, CANCEL Note The parameter setting for Dimmer is not initialized (see page 95). ■ TV format TV FORMAT Use to set the color encoding format of your television. Choices: PAL, NTSC Initial setting: NTSC (U.S.A., Canada, General and Korea models) PAL (other models) Note This parameter setting only affects the video monitor connected to the MONITOR OUT jacks and does not affect the Zone 2 video monitor connected to the ZONE 2 VIDEO jacks. ■ GUI language LANG. Use to select the language of your choice that appears in the GUI (graphical user interface) menu of this unit. Choices: ENGLISH (English), JAPANESE (Japanese), FRENCH (French), GERMAN (German), SPANISH (Spanish) 102