Yamaha RX-V2600 Owner's Manual - Page 38

AUTO SETUP 5 Press k / n repeatedly to select Wiring, Distance, Size, Equalizing or Level and then press h. Wiring Distance Size Skip Check Wiring Distance Size Equalizing Skip Check Wiring Distance Size Equalizing Level Skip Check Distance Size Equalizing Level Skip Check: Natural Check: Flat Check: Front For Equalizing, press k / n to select: Skip To skip the selected item and perform no adjustments. Check: Natural To average out the frequency response of all speakers with higher frequencies being less emphasized. Recommended if the "Flat" setting sounds a little harsh. Check: Flat To average the frequency response of all speakers. Recommended if all of your speakers are of similar quality. Check: Front To adjust the frequency response of each speaker in accordance with the sound of your front speakers. Recommended if your front speakers are of much higher quality than your other speakers. 7 Once you have selected the desired setting, press l to move back to Setup Menu. Information Setup Menu Setup Type Start Wiring Distance Size Size Equalizing Level Skip Check 6 For Wiring, Distance, Size or Level, select: Check Skip To automatically check and adjust the selected item. To skip the selected item and perform no adjustments. y When using THX speakers, select "Skip" for Size and make sure that "Small" or "Small x2" is selected in Speaker Set (see page 90) and that "80Hz" is selected in Bass Cross Over (see page 92). 8 Press n to select Setup Type and then select: Auto Step To automatically perform the entire AUTO SETUP procedure. To pause for confirmation between each check in the AUTO SETUP procedure. Information Setup Menu Setup Type Auto Start Step 34