Yamaha RX-V2600 Owner's Manual - Page 87

Manual Setup (Sound) Use this menu to adjust the sound parameters. 1 Set AMP/SOURCE/TV to AMP and then press GUI TOP on the remote control. AMP SOURCE TV GUI TOP TITLE BAND SYSTEM OPTIONS ■ LFE Level (Low-frequency effect level) Use to adjust the output level of the LFE (low-frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low-frequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes Dolby Digital or DTS signals. To access these parameters, select: Manual Setup > Sound > LFE Level > Control range: -20.0 to 0.0 dB Control step: 1 dB 2 Press k / n on the remote control to select Manual Setup and then press h. Speaker 0.0dB PRESET/CH PRESET/CH Headphone ENTER A-E/CAT. ENTER A-E/CAT. 3 Press k / n on the remote control to select Sound and then press h. PRESET/CH PRESET/CH ENTER A-E/CAT. ENTER A-E/CAT. Speaker (Speaker low-frequency effect level) Select to adjust the speaker LFE level. Headphone (Headphone low-frequency effect level) Select to adjust the headphone LFE level. Note Depending on the settings of LFE Level, some signals may not be output at the SUBWOOFER jack. Sound Video Basic LFE Level Dynamic Range Parametric EQ Tone Control Audio Option 4 Select the desired parameters and then press h to access and adjust. PRESET/CH ENTER A-E/CAT. ADVANCED OPERATION 83