Yamaha RX-V2600 Owner's Manual - Page 99

5 When finished adjusting parameters, press ENTER on the remote control. PRESET/CH SYSTEM OPTIONS Speaker B (Speaker B) Use this feature to select the location of the front speakers connected to the SPEAKERS B terminals. Choices: Main, Zone B ENTER A-E/CAT. ■ Dimmer (Dimmer) Use to adjust the brightness of the front panel display. Manual Setup > Option > Dimmer > Control range: -4 to 0 Dimmer 0 Multi Zone Sur.Initialize ■ Multi Zone (Multi zone) Use this feature to customize the Zone 2 and Zone 3 settings. Manual Setup > Option > Multi Zone > Choices: Speaker B, Zone2 Amplifier, Zone3 Amplifier, Zone2 Volume, Zone3 Volume, Zone2 OSD Speaker B Zone2 Amplifier Zone3 Amplifier Main Zone B • Select "Main" to turn on/off SPEAKERS A and B when the speakers connected to the SPEAKERS B terminals are set in the main room. • Select "Zone B" if the speakers connected to the SPEAKERS B terminals are set in another room. If SPEAKERS A is turned off and SPEAKERS B is turned on, all the speakers including the subwoofer in the main room are muted and the unit outputs sound from SPEAKERS B only. Notes • If you select "Zone B" and connect headphones to the PHONES jack on this unit, the sound is output from both the headphones and SPEAKERS B. • When a DSP program is selected, the unit automatically enters the Virtual CINEMA DSP mode. Dimmer Multi Zone Sur.Initialize Audio Select Speaker B Zone2 Amplifier Zone3 Amplifier Zone2 Volume ADVANCED OPERATION 95