Yamaha RX-V2600 Owner's Manual - Page 121
Controlling Zone 2 and Zone 3, Remote control operations, Selecting the input source of Zone 2 or
UPC - 027108924397
View all Yamaha RX-V2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
y • You must complete this step within 5 seconds while the selected zone flashes in the front panel display. Otherwise, the currently selected zone mode is automatically canceled. In this case, press ZONE CONTROL again. • The initial setting is ZONE2 when both Zone 2 and Zone 3 are turned on. 3 Proceed to "Controlling Zone 2 and Zone 3" on page 117 for detailed information on the Zone 2 and Zone 3 control functions. ■ Remote control operations 1 Set AMP/SOURCE/TV on the remote control to AMP. AMP SOURCE TV 2 Press SELECT k repeatedly to select the zone you want to control. ZONE 2 or ZONE 3 is displayed in the display window. SELECT ZONE 2/ZONE 3 Controlling Zone 2 and Zone 3 Once the zone you want to control is selected as described in "Selecting Zone 2 or Zone 3" on page 116, you can control Zone 2 and Zone 3 by using the control buttons on the front panel or on the remote control. The available operations are listed as follows: • Selecting the input source of Zone 2 or Zone 3 • Adjusting the volume level of Zone 2 or Zone 3 • Adjusting the tonal quality of Zone 2 or Zone 3 • Tuning into FM or AM when TUNER is selected as the input source of Zone 2 or Zone 3 • Tuning into the XM Satellite Radio when XM is selected as the input source of Zone 2 or Zone 3 ■ Selecting the input source of Zone 2 or Zone 3 Use the INPUT selector on the front panel (or press one of the input selector buttons on the remote control) to select the input source of the selected zone. If the remote control is used to select the input source, "2: name of the selected input source" or "3: name of the selected input source" is displayed in the display window when Zone 2 or Zone 3 is selected respectively. INPUT or (U.S.A. model) A XM AUDIO SEL SLEEP PHONO TUNER CD MULTI CH IN V-AUX CBL/SAT MD/TAPE CD-R DTV VCR 1 DVR/VCR2 DVD or 3 Proceed to "Controlling Zone 2 and Zone 3" on page 117 for detailed information on the Zone 2 and Zone 3 control functions. 4 Press SELECT k / n to exit from the Zone 2/Zone 3 mode. Notes • The input source of Zone 2 and the source available for recording are always the same. • ZONE 2 or ZONE 3 appears in the display window only when k is pressed, and ALL appears only when n is pressed. • Select TUNER as the input source to use the TUNER features in the selected zone. For details about the TUNER operations, see "FM/AM TUNING" on page 47. • Select XM as the input source to use the XM Satellite Radio features in the selected zone. For details about the XM Satellite Radio operations, see "XM® SATELLITE RADIO TUNING" on page 53. Note The selected input source is shared across all zones. y You must complete this step within 5 seconds while the selected zone flashes in the front panel display. Otherwise, the currently selected zone mode is automatically canceled. In this case, press ZONE CONTROL on the front panel again. ADVANCED OPERATION 117