Yamaha V3.0.x M7cl V3 Editor Owner's Manual (v3.0.x) - Page 36
Ratio, Attack, Release, Key In Source, Library, Response Curve, Gr Meter, Threshold, If Compander-h
View all Yamaha V3.0.x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
G RATIO Specifies the ratio at which the input signal will be compressed when the key-in signal exceeds the threshold. H KNEE Specifies the sharpness at which the output level will change. You can select from HARD or 1-5. I ATTACK Specifies the time from when the key-in signal exceeds the threshold level until the signal starts being compressed. J GAIN Adjusts the gain of the signal after it has passed through the compressor. K RELEASE Specifies the time from when the key-in signal falls below the threshold level until compression is removed. L KEY IN SOURCE Click this to select the key-in signal that you want to use. The choices are the same as for GATE. If COMPANDER-H, COMPANDER-S is selected 51 4 2 3 6 7 8 9 J K L A TYPE Indicates the type of the currently selected compressor. You can click here to select the type. B LIBRARY This button accesses the dynamics library. Clicking this button will open the DYNAMICS page of the LIBRARY window. C ON This button switches the compressor on/off. D Response curve Indicates the response for the compander of the currently selected channel. E GR meter This meter indicates the amount of gain reduction produced by the compressor. F THRESHOLD Specifies the threshold level at which the compressor will operate. The input signal will start being compressed when the key-in signal exceeds this level; compression will be removed when the signal falls below this level. G RATIO Specifies the ratio at which the input signal will be compressed when the key-in signal exceeds the threshold. 36 M7CL V3 Editor Owner's Manual