Yamaha V3.0.x M7cl V3 Editor Owner's Manual (v3.0.x) - Page 37
WIDTH, ATTACK, RELEASE, KEY IN SOURCE, LIBRARY, Response curve, GR meter, THRESHOLD
View all Yamaha V3.0.x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
H WIDTH Specifies the width between the threshold level of the compressor (THRESHOLD) and the threshold level of the expander. The expander effect will apply to levels below THRESHOLD + WIDTH. I ATTACK Specifies the time from when the key-in signal exceeds the threshold level until the signal starts being compressed. J GAIN Adjusts the gain of the signal after it has passed through the compressor. K RELEASE Specifies the time from when the key-in signal falls below the threshold level until compression is removed. L KEY IN SOURCE Click this to select the key-in signal that you want to use. The choices are the same as for GATE. If DE-ESSER is selected 51 2 3 6 7 4 8 A TYPE This indicates that De-Esser is the currently selected type. B LIBRARY This button accesses the dynamics library. Clicking this button will open the DYNAMICS page of the LIBRARY window. C ON This button switches the de-esser on/off. D Response curve Indicates the response for the de-esser of the currently selected channel. E GR meter This meter indicates the amount of gain reduction produced by the de-esser. F THRESHOLD Specifies the threshold level at which the de-esser will operate. The input signal will start being compressed when the key-in signal exceeds this level; compression will be removed when the signal falls below this level. G FREQ. (Minimum frequency) Specifies the minimum frequency at which the key-in signal will activate the de-esser. H KEY IN SOURCE Click this to select the key-in signal that you want to use. The choices are the same as for GATE. 37 M7CL V3 Editor Owner's Manual