Yamaha V3.0.x M7cl V3 Editor Owner's Manual (v3.0.x) - Page 38

INSERT except for ST IN channels, OUT Insert out, IN Insert in, POINT Insert point, HA gain M7CL-48ES

Get Yamaha V3.0.x PDF manuals and user guides View all Yamaha V3.0.x manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

❏ INSERT (except for ST IN channels) 1 23 5 64 A ON Enables/disables insert-in/out. B OUT (Insert out) Click this to select the output port that will be assigned to insert-out, from the following choices. NONE OMNI 1-OMNI 8(M7CL-48ES) SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16 RACK1A, RACK1B...RACK8R(B) No assignment OMNI OUT jacks 1-8 Output channels of an I/O card installed in slots 1-3 L/R outputs of Rack 1-8 C IN (Insert in) Click this to select the input port that will be assigned to insert-in, from the following choices. NONE OMNI 1-OMNI 8(M7CL-48ES) SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16 RACK1A, RACK1B...RACK8R(B) No assignment OMNI IN jacks 1-8 Input channels of an I/O card installed in slots 1-3 L/R inputs of Rack 1-8 D POINT (Insert point) Selects the position at which insert-in/out will be patched. Choose from PRE EQ, PRE FADER, or POST ON. E HA gain (M7CL-48ES) Adjusts the HA gain for OMNI IN. This knob appears only if you select OMNI as INSERT IN (3). F 48V (M7CL-48ES) Switches phantom power (+48V) on/off. This button appears only if you select OMNI as INSERT IN (3). ❏ DIRECT OUT (except for ST IN channels) 1 2 3 4 A ON Turns the direct output on/off. B DIRECT OUT GAIN Adjusts the gain of the direct output. The current value is shown in the numerical box below the knob. You can set this to the nominal value (0.0 dB) by holding down the (< >) key and clicking the knob. 38 M7CL V3 Editor Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
M7CL V3 Editor Owner’s Manual
38
❏
INSERT (except for ST IN channels)
A
ON
Enables/disables insert-in/out.
B
OUT (Insert out)
Click this to select the output port that will be assigned to insert-out, from the following choices.
C
IN (Insert in)
Click this to select the input port that will be assigned to insert-in, from the following choices.
D
POINT (Insert point)
Selects the position at which insert-in/out will be patched. Choose from PRE EQ, PRE FADER, or POST ON.
E
HA gain (M7CL-48ES)
Adjusts the HA gain for OMNI IN. This knob appears only if you select OMNI as INSERT IN (
3
).
F
48V (M7CL-48ES)
Switches phantom power (+48V) on/off. This button appears only if you select OMNI as INSERT IN (
3
).
❏
DIRECT OUT (except for ST IN channels)
A
ON
Turns the direct output on/off.
B
DIRECT OUT GAIN
Adjusts the gain of the direct output. The current value is shown in the numerical box below the knob. You can set
this to the nominal value (0.0 dB) by holding down the <Ctrl>(<
>) key and clicking the knob.
NONE
No assignment
OMNI 1-OMNI 8(M7CL-48ES)
OMNI OUT jacks 1–8
SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16
Output channels of an I/O card installed in slots 1–3
RACK1A, RACK1B...RACK8R(B)
L/R outputs of Rack 1–8
NONE
No assignment
OMNI 1-OMNI 8(M7CL-48ES)
OMNI IN jacks 1–8
SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16
Input channels of an I/O card installed in slots 1–3
RACK1A, RACK1B...RACK8R(B)
L/R inputs of Rack 1–8
1
2
3
4
5
6
1
2
3
4