Zenith C32V23 Operating Guide - Page 43

Mode Sound Switch Setup This feature is typically used to set up the remote to control the sound from an external audio system, or cable box, without changing modes Note: Check to make sure the remote operates the device you want to hear. If not, see the remote programming page. 1 With a small blunt object, press and hold PRG until the LED 1 indicator light turns on (about 3 seconds), then release PRG. 2 Press the mode button of the device you want to hear: CABLE, VCR, AUX, TV. Indicator Light 3 Press the Vol+ button, the LED will blink. 4 Press the button of the mode you want the volume to be con- trolled by: CABLE, VCR, AUX, TV. 5 Press ENTER to save the code (The indicator light will flash 2 times and then turn off). For example: If you want the VCR mode to control the volume of the AUX mode (audio system), press VCR in Step 2 and press AUX in Step 4. Then, when you press volume in VCR mode, the device programmed for the AUX mode will respond. Default Mode Volume Control Setups Mode TV VCR AUX CABLE Sound controlling mode TV (Controls TV volume.) TV (Controls TV volume.) AUX (Controls AUX Volume.) CABLE (Controls Cable Volume.) PRG POWER CABLE VCR AUX TV SURF FLASHBK MUTE CHANNEL VOLUME VOLUME CHANNEL 123 4 56 7 89 0 - MENU ENTER RATIO SIGNAL AUDIO VIDEO CC QUIT RECORD PAUSE TIMER SOURCE REWIND PLAY STOP F FWD 2/4 3 5 If you can't find the code for your amplifier, use the Auto Search feature described on page 45. Mini glossary AMPLIFIER CABLE BOX VOLUME AUX Audio device which sends sound to speakers, like an Audio Tuner, Receiver, or Amplifier. See Audio Tuners/Amp list on page 47. Some cable boxes have volume controls. Auxiliary equipment. 206-3767 PAGE 43