ZyXEL ES3500-24HP User Guide - Page 105

Chapter 9 VLAN Table 23 Advanced Application > VLAN > Static VLAN (continued) LABEL DESCRIPTION Tagging Select TX Tagging if you want the port to tag all outgoing frames transmitted with this VLAN Group ID. Add Click Add to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Cancel Click Cancel to begin configuring this screen afresh. Clear Click Clear to start configuring the screen again. VID This field displays the ID number of the VLAN group. Click the number to edit the VLAN settings. Active This field indicates whether the VLAN settings are enabled (Yes) or disabled (No). Name This field displays the descriptive name for this VLAN group. Delete Click Delete to remove the selected entry from the summary table. Cancel Click Cancel to clear the Delete check boxes. 9.5.4 Configure VLAN Port Settings Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a port. See Section 9.1 on page 99 for more information on static VLAN. Click the VLAN Port Setting link in the VLAN Status screen. Figure 43 Advanced Application > VLAN > VLAN Port Setting The following table describes the labels in this screen. Table 24 Advanced Application > VLAN > VLAN Port Setting LABEL GVRP DESCRIPTION GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for switches to register necessary VLAN members on ports across the network. Port Select this check box to permit VLAN groups beyond the local Switch. This field displays the port number. ES3500 Series User's Guide 105