ZyXEL ES3500-24HP User Guide - Page 184
Port-based Q-in-Q
View all ZyXEL ES3500-24HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Chapter 23 VLAN Stacking Table 63 Advanced Application > VLAN Stacking (continued) LABEL DESCRIPTION Apply Click Apply to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Cancel Click Cancel to begin configuring this screen afresh. 23.4.1 Port-based Q-in-Q Port-based Q-in-Q lets the Switch treat all frames received on the same port as the same VLAN flows and add the same outer VLAN tag to them, even they have different customer VLAN IDs. Click Port-based QinQ in the Advanced Application > VLAN Stacking screen to display the screen as shown. Figure 96 Advanced Application > VLAN Stacking > Port-based QinQ The following table describes the labels in this screen. Table 64 Advanced Application > VLAN Stacking > Port-based QinQ LABEL Port SPVID Priority DESCRIPTION The port number identifies the port you are configuring. SPVID is the service provider's VLAN ID (the outer VLAN tag). Enter the service provider ID (from 1 to 4094) for frames received on this port. See Chapter 9 on page 99 for more background information on VLAN ID. Select a priority level (from 0 to 7). This is the service provider's priority level that adds to the frames received on this port. Apply Cancel "0" is the lowest priority level and "7" is the highest. Click Apply to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Click Cancel to begin configuring this screen afresh. 184 ES3500 Series User's Guide