ZyXEL ES3500-24HP User Guide - Page 143
Bandwidth Control Setup
View all ZyXEL ES3500-24HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Chapter 14 Bandwidth Control 14.2 Bandwidth Control Setup Click Advanced Application > Bandwidth Control in the navigation panel to bring up the screen as shown next. Figure 71 Advanced Application > Bandwidth Control The following table describes the related labels in this screen. Table 41 Advanced Application > Bandwidth Control LABEL Active Port * DESCRIPTION Select this check box to enable bandwidth control on the Switch. This field displays the port number. Settings in this row apply to all ports. Use this row only if you want to make some settings the same for all ports. Use this row first to set the common settings and then make adjustments on a port-by-port basis. Ingress Rate Active Commit Rate Active Peak Rate Active Egress Rate Note: Changes in this row are copied to all the ports as soon as you make them. Select this check box to activate commit rate limits on this port. Specify the guaranteed bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow on a port. The commit rate should be less than the peak rate. The sum of commit rates cannot be greater than or equal to the uplink bandwidth. Select this check box to activate peak rate limits on this port. Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow on a port. Select this check box to activate egress rate limits on this port. Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the out-going traffic flow on a port. ES3500 Series User's Guide 143