ZyXEL ES3500-24HP User Guide - Page 189
Multicast Setting
View all ZyXEL ES3500-24HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Chapter 24 Multicast 24.3 Multicast Setting Click Advanced Applications > Multicast > Multicast Setting link to display the screen as shown. See Section 24.1 on page 187 for more information on multicasting. Figure 99 Advanced Application > Multicast > Multicast Setting The following table describes the labels in this screen. Table 67 Advanced Application > Multicast > Multicast Setting LABEL DESCRIPTION IGMP Snooping Use these settings to configure IGMP Snooping. Active Select Active to enable IGMP Snooping to forward group multicast traffic only to ports that are members of that group. Querier Select this option to allow the Switch to send IGMP General Query messages to the VLANs with the multicast hosts attached. Host Timeout Specify the time (from 1 to 16 711 450) in seconds that elapses before the Switch removes an IGMP group membership entry if it does not receive report messages from the port. 802.1p Priority Select a priority level (0-7) to which the Switch changes the priority in outgoing IGMP control packets. Otherwise, select No-Change to not replace the priority. IGMP Filtering Select Active to enable IGMP filtering to control which IGMP groups a subscriber on a port can join. Note: If you enable IGMP filtering, you must create and assign IGMP filtering profiles for the ports that you want to allow to join multicast groups. ES3500 Series User's Guide 189