ZyXEL NBG6615 User Guide - Page 128

Back to Factory Defaults, 20.5 Restart Screen

Page 128 highlights

Chapter 20 Tools Note: Do not turn off the NBG6615 while configuration file upload is in progress. After you see a "configuration upload successful" screen, you must then wait 30 seconds before logging into the NBG6615 again. Figure 91 Configuration Restore Successful The NBG6615 automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop. Figure 92 Temporarily Disconnected If you uploaded the default configuration file you may need to change the IP address of your computer to be in the same subnet as that of the default NBG6615 IP address (192.168.1.1 in router mode). See Appendix C on page 157 for details on how to set up your computer's IP address. If the upload was not successful, the following screen will appear. Click Return to go back to the Configuration screen. Figure 93 Configuration Restore Error 20.4.3 Back to Factory Defaults Pressing the Reset to default button in this section clears all user-entered configuration information and returns the NBG6615 to its factory defaults. You can also press the Reset button on the rear panel to reset the factory defaults of your NBG6615. Refer to Section 1.4.1 on page 14 for more information on the Reset button. 20.5 Restart Screen System restart allows you to reboot the NBG6615 without turning the power off. Click Maintenance > Tools > Restart. Click Restart to have the NBG6615 reboot. This does not affect the NBG6615's configuration. NBG6615's User's Guide 128

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216

Chapter 20 Tools
NBG6615’s User’s Guide
128
Note: Do not turn off the NBG6615 while configuration file upload is in progress.
After you see a “configuration upload successful” screen, you must then wait 30 seconds before logging
into the NBG6615 again.
Figure 91
Configuration Restore Successful
The NBG6615 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 92
Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your computer
to be in the same subnet as that of the default NBG6615 IP address (192.168.1.1 in router mode). See
Appendix C on page 157
for details on how to set up your computer’s IP address.
If the upload was not successful, the following screen will appear. Click
Return
to go back to the
Configuration
screen.
Figure 93
Configuration Restore Error
20.4.3
Back to Factory Defaults
Pressing the
Reset to default
button in this section clears all user-entered configuration information and
returns the NBG6615 to its factory defaults.
You can also press the
Reset
button on the rear panel to reset the factory defaults of your NBG6615.
Refer to
Section 1.4.1 on page 14
for more information on the
Reset
button.
20.5
Restart Screen
System restart allows you to reboot the NBG6615 without turning the power off.
Click
Maintenance > Tools
>
Restart
. Click
Restart
to have the NBG6615 reboot. This does not affect the
NBG6615's configuration.