ZyXEL NBG6615 User Guide - Page 61
WPS Screen
View all ZyXEL NBG6615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 6 Wireless LAN The following table describes the labels on this screen. Table 16 Network > Wireless LAN (2.4G/5G)> WLAN Advanced Setup LABEL DESCRIPTION Tx Power Enable Intra-BSS Traffic This field controls the transmission power of the NBG6615. If there is a high density of APs in an area, decrease the output power of the NBG6615 to reduce interference with other APs. A Basic Service Set (BSS) exists when all communications between wireless clients or between a wireless client and a wired network client go through one access point (AP). MU-MIMO and TX Beamforming Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled, wireless client A and B can access the wired network and communicate with each other. When IntraBSS is disabled, wireless client A and B can still access the wired network but cannot communicate with each other. Select Enabled to turn on both Multi User-MIMO and Transmit Beamforming. This will improve WiFi performance with MU MIMO-compatible wireless clients. Multi User-MIMO allows the NBG6615 to communicate with multiple wireless clients simultaneously, dividing its bandwidth evenly among all MIMO-compatible wireless clients and keeping the WiFI signal constant for them all. Apply Reset Transmit Beamforming lets the NBG6615 focus its signals directly to wireless clients to effectively extend wireless coverage and minimize dead spots. Click Apply to save your changes to the NBG6615. Click Reset to reload the previous configuration for this screen. 6.7 WPS Screen Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS status. To open this screen, click Network > Wireless LAN 2.5G/5G> WPS tab. NBG6615's User's Guide 61