ZyXEL NBG6615 User Guide - Page 47
Configuring Security Settings of Multiple SSIDs, Start > Run, Login, Apply, Ignore
View all ZyXEL NBG6615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 5 Tutorials 5.5.1 Configuring Security Settings of Multiple SSIDs The NBG6615 is in router mode by default. This example shows you how to configure the SSIDs with the following parameters on your NBG6615 (in router mode). SSID SSID_Workers SSID_VoIP SSID_Guest SECURITY TYPE WPA2-PSK WPA Compatible WPA-PSK/WPA2-PSK WPA-PSK/WPA2-PSK KEY DoNotStealMyWirelessNetwork VoIPOnly12345678 keyexample123 1 Connect your computer to the LAN port of the NBG6615 using an Ethernet cable. 2 The default IP address of the NBG6615 in router mode is "192.168.212.1". In this case, your computer must have an IP address in the range between "192.168.212.2" and "192.168.212.254". 3 Click Start > Run on your computer in Windows. Type "cmd" in the dialog box. Enter "ipconfig" to show your computer's IP address. If your computer's IP address is not in the correct range then see Appendix C on page 157 for information on changing your computer's IP address. 4 After you've set your computer's IP address, open a web browser such as Internet Explorer and type "http://192.168.212.1" as the web address in your web browser. 5 Enter "1234" (default) as the password and click Login. 6 Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore. 7 A window appears asking you to select Wizard or Advance mode. Click Go to Advanced Setup in the navigation panel. 8 Go to Network > Wireless LAN (2.4G/5G) > MBSSID. Type SSID_Workers in the Name (SSID) field, select WPA2-PSK in the Security drop-down list, enter the pre-shared key and click Apply. NBG6615's User's Guide 47