Home » ZyXEL Manuals » Bridges & Routers » ZyXEL NBG6615 » Manual Viewer

ZyXEL NBG6615 User Guide - Page 75

Advanced Screen

Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

Chapter 7 WAN Table 24 Network > WAN > Internet Connection: PPTP (continued) LABEL DESCRIPTION User Name Password Connection Type Type the user name given to you by your ISP. Type the password associated with the User Name above. Select Continuous if you do not want the connection to time out. Select Connect on Demand if you want to connect for a certain amount of time before the router automatically disconnects from the PPPoE server. If you select this you will need to enter the number of minutes in the Idle Timeout field. Idle Time Select Manual if want to make the connection manually. This field is available only when you select Connect on Demand. MTU Size DNS Servers Attain DNS Automatically/ Set DNS Manually First DNS Server Specify the time in minutes that elapses before the router automatically disconnects from the PPPoE server. Enter the Maximum Transmission Unit (MTU) or the largest packet size per frame that your NBG6615 can receive and process. Click Attain DNS Automatically radio button if your ISP dynamically assigns DNS server information (and the NBG6615's WAN IP address). Or click Set DNS Manually if you have if you have the IP address of a DNS server. Enter the first and second DNS server's IP address in the box fields. Second DNS Server WAN MAC Address The MAC address section allows users to configure the WAN port's MAC address by either using the NBG6615's MAC address, copying the MAC address from a computer on your LAN or manually entering a MAC address. Factory default Select this option to use the factory assigned default MAC Address. Clone the computer's MAC address - MAC Address Select this option to clone the MAC address of the computer (displaying in the screen) from which you are configuring the NBG6615. Once it is successfully configured, the address will be copied to the rom file. It will not change unless you change the setting or upload a different ROM file. Set WAN MAC Address Select this option and enter the MAC address you want to use. Apply Click Apply to save your changes back to the NBG6615. Reset Click Reset to begin configuring this screen afresh. 7.4 Advanced Screen Use this screen to set up multicast configurations. Click Network > WAN > Advanced. NBG6615's User's Guide 75

Section	Page
NBG6615	1
Contents Overview	3
Table of Contents	4
User’s Guide	10
Introduction	11
1.1 Overview	11
1.2 Securing the NBG6615	12
1.3 LEDs	13
1.4 The WPS Button	13
1.4.1 Using the WPS Button	14
1.5 Reboot/Reset Button	14
1.6 Wall Mounting	14
The Web Configurator	16
2.1 Overview	16
2.2 Accessing the Web Configurator	16
2.3 Resetting the NBG6615	18
Connection Wizard	20
3.1 Wizard Setup	20
3.1.1 Static IP Connection	22
3.1.2 DHCP Client	22
3.1.3 PPPoE Connection	23
3.1.4 PPTP Connection	24
Modes	28
4.1 Overview	28
4.2 Setting your NBG6615 to Router Mode	29
4.2.1 Status Screen (Router Mode)	29
4.2.2 Router Mode Navigation Panel	33
4.3 Setting your NBG6615 to AP Mode	34
4.3.1 Status Screen (AP Mode)	35
4.3.2 AP Navigation Panel	37
Tutorials	39
5.1 Overview	39
5.2 How to Connect to the Internet from an AP	39
5.3 Configure Wireless Security Using WPS on both your NBG6615 and Wireless Client	39
5.3.1 Push Button Configuration	40
5.3.2 PIN Configuration	41
5.4 Enable and Configure Wireless Security without WPS on your NBG6615	43
5.4.1 Configure Your Wireless Client	44
5.5 Using Multiple SSIDs on the NBG6615	46
5.5.1 Configuring Security Settings of Multiple SSIDs	47
5.6 Installing UPnP in Windows 7 Example	50
5.7 Using Bandwidth Management on the NBG6615	50
Technical Reference	53
Wireless LAN	54
6.1 Overview	54
6.2 What You Can Do	54
6.3 What You Should Know	55
6.3.1 Wireless Security Overview	55
6.3.2 MBSSID	55
6.3.3 MAC Address Filter	56
6.3.4 Encryption	56
6.3.5 WPS	56
6.4 General Wireless LAN Screen	57
6.4.1 No Security	58
6.4.2 WPA2-PSK or WPA-PSK/WPA2-PSK	58
6.5 MAC Filter	59
6.6 Wireless LAN Advanced Screen	60
6.7 WPS Screen	61
6.8 WPS Station Screen	63
6.9 Scheduling Screen	63
6.10 MBSSID Screen	64
WAN	67
7.1 Overview	67
7.2 What You Need To Know	67
7.2.1 Configuring Your Internet Connection	67
7.3 Internet Connection Screen	68
7.3.1 Static IP	68
7.3.2 DHCP Client	70
7.3.3 PPPoE Connection	71
7.3.4 PPTP Connection	73
7.4 Advanced Screen	75
LAN	77
8.1 Overview	77
8.2 What You Need To Know	77
8.2.1 IP Address and Subnet Mask	78
8.2.2 DNS Server Address Assignment	78
8.2.3 IP Pool Setup	79
8.2.4 LAN TCP/IP	79
8.3 LAN IP Screen	79
DHCP Server	81
9.1 Overview	81
9.2 What You Can Do	81
9.3 What You Need To Know	81
9.4 General Screen	81
9.5 Static DHCP Screen	82
9.6 Client List Screen	83
Network Address Translation	85
10.1 Overview	85
10.2 What You Can Do	85
10.2.1 What You Need To Know	86
10.3 General NAT Screen	87
10.4 NAT Application Screen	88
10.5 Port Triggering Screen	90
10.6 Technical Reference	91
10.6.1 NAT Port Forwarding: Services and Port Numbers	92
10.6.2 NAT Port Forwarding Example	92
10.6.3 Trigger Port Forwarding	92
10.6.4 Trigger Port Forwarding Example	93
10.6.5 Two Points To Remember About Trigger Ports	93
Dynamic DNS	94
11.1 Overview	94
11.2 Dynamic DNS Screen	94
Static Route	96
12.1 Overview	96
12.2 IP Static Route Screen	96
Firewall	99
13.1 Overview	99
13.2 What You Can Do	99
13.3 What You Need To Know	100
13.3.1 About the NBG6615 Firewall	100
13.3.2 VPN Pass Through Features	100
13.4 General Firewall Screen	100
13.5 Services Screen	101
13.6 MAC Filter Screen	102
Content Filter	104
14.1 Overview	104
14.2 What You Can Do	104
14.3 Filter Screen	104
Remote Management	106
15.1 Overview	106
15.1.1 Remote Management Limitations	107
15.1.2 Remote Management and NAT	107
15.1.3 System Timeout	107
15.2 WWW Screen	107
Universal Plug-and-Play (UPnP)	109
16.1 Overview	109
16.2 What You Need to Know	109
16.3 Configuring UPnP	110
16.4 Installing UPnP in Windows 7 Example	110
16.4.1 Using UPnP in Windows XP Example	112
16.4.2 Web Configurator Easy Access	114
Bandwidth MGMT	117
17.1 Overview	117
17.2 What You Can Do	117
17.3 What You Need To Know	117
17.4 Bandwidth MGMT Screen	117
17.5 Advanced Screen	118
System	120
18.1 Overview	120
18.2 What You Can Do	120
18.3 System General Screen	120
18.4 Time Setting Screen	121
Logs	123
19.1 Overview	123
19.2 What You Need to Know	123
19.3 View Log Screen	123
Tools	125
20.1 Overview	125
20.2 What You Can Do	125
20.3 Firmware Upload Screen	125
20.4 Configuration Screen	127
20.4.1 Backup Configuration	127
20.4.2 Restore Configuration	127
20.4.3 Back to Factory Defaults	128
20.5 Restart Screen	128
Sys OP Mode	130
21.1 Overview	130
21.2 General Screen	130
Language	132
22.1 Language Screen	132
Troubleshooting and Appendices	133
Troubleshooting	134
23.1 Power, Hardware Connections, and LEDs	134
23.2 NBG6615 Access and Login	135
23.3 Internet Access	136
23.4 Resetting the NBG6615 to Its Factory Defaults	137
23.5 Wireless Problems	138
IP Addresses and Subnetting	139
Pop-up Windows, JavaScripts and Java Permissions	148
Setting Up Your Computer’s IP Address	157
Wireless LANs	184
Common Services	197
Legal Information	200
Customer Support	207

Match case Limit results 1 per page

Chapter 7 WAN

NBG6615’s User’s Guide

7.4

Advanced Screen

Use this screen to set up multicast configurations. Click

Network

WAN

Advanced

User Name

Type the user name given to you by your ISP.

Password

Type the password associated with the User Name above.

Connection

Type

Select

Continuous

if you do not want the connection to time out.

Select

Connect on Demand

if you want to connect for a certain amount of time before the

router automatically disconnects from the PPPoE server. If you select this you will need to enter

the number of minutes in the

Idle Timeout

field.

Select

Manual

if want to make the connection manually.

Idle Time

This field is available only when you select

Connect on Demand

Specify the time in minutes that elapses before the router automatically disconnects from the

PPPoE server.

MTU Size

Enter the Maximum Transmission Unit (MTU) or the largest packet size per frame that your

NBG6615 can receive and process.

DNS Servers

Attain DNS

Automatically/

Set DNS

Manually

Click

Attain DNS Automatically

radio button if your ISP dynamically assigns DNS server

information (and the NBG6615’s WAN IP address). Or click

Set DNS Manually

if you have if you

have the IP address of a DNS server.

First DNS Server

Second DNS

Server

Enter the first and second DNS server's IP address in the box fields.

WAN MAC Address

The MAC address section allows users to configure the WAN port's MAC address by either using the NBG6615’s

MAC address, copying the MAC address from a computer on your LAN or manually entering a MAC address.

Factory default

Select this option to use the factory assigned default MAC Address.

Clone the

computer's MAC

address - MAC

Address

Select this option to clone the MAC address of the computer (displaying in the screen) from

which you are configuring the NBG6615. Once it is successfully configured, the address will be

copied to the rom file. It will not change unless you change the setting or upload a different

ROM file.

Set WAN MAC

Address

Select this option and enter the MAC address you want to use.

Apply

Click

Apply

to save your changes back to the NBG6615.

Reset

Click

Reset

to begin configuring this screen afresh.

Table 24

Network > WAN > Internet Connection: PPTP (continued)

LABEL

DESCRIPTION