ZyXEL NBG6615 User Guide - Page 29

Setting your NBG6615 to Router Mode, 4.2.1 Status Screen (Router Mode)

Page 29 highlights

Chapter 4 Modes 4.2 Setting your NBG6615 to Router Mode The NBG6615 is set to wireless router mode by default. If it was changed and now you want to set it back, do the following procedure. 1 Connect your computer to the LAN port of the NBG6615. 2 The default LAN IP address of the NBG6615 is 192.168.212.1 in router mode and 192.168.1.2 by default in Access Point mode. In router mode, the NBG6615 can assign your computer an IP address, so you must set your computer to get an IP address automatically (computer factory default) or give it a fixed IP address in the range between 192.168.212.3 and 192.168.212.254. 3 After you've set your computer's IP address, open a web browser such as Internet Explorer and type the IP address of the NBG6615 as the web address in your web browser. 4 Log into the Web Configurator. See the Chapter 2 on page 16 for instructions on how to do this. 5 Go to Maintenance > Sys OP Mode > General and select Router. 6 Click Apply. Note: Wait while the NBG6615 restarts, then log in to the Web Configurator again. The NBG6615 IP address is now 192.168.212.1. 4.2.1 Status Screen (Router Mode) The screen below shows the status screen in Router mode. NBG6615's User's Guide 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216

Chapter 4 Modes
NBG6615’s User’s Guide
29
4.2
Setting your NBG6615 to Router Mode
The NBG6615 is set to wireless router mode by default. If it was changed and now you want to set it
back, do the following procedure.
1
Connect your computer to the LAN port of the NBG6615.
2
The default LAN IP address of the NBG6615 is 192.168.212.1 in router mode and 192.168.1.2 by default in
Access Point mode. In router mode, the NBG6615 can assign your computer an IP address, so you must
set your computer to get an IP address automatically (computer factory default) or give it a fixed IP
address in the range between 192.168.212.3 and 192.168.212.254.
3
After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and type the
IP address of the NBG6615 as the web address in your web browser.
4
Log into the Web Configurator. See the
Chapter 2 on page 16
for instructions on how to do this.
5
Go to
Maintenance > Sys OP Mode > General
and select
Router
.
6
Click
Apply
.
Note: Wait while the NBG6615 restarts, then log in to the Web Configurator again. The
NBG6615 IP address is now 192.168.212.1.
4.2.1
Status Screen (Router Mode)
The screen below shows the status screen in
Router
mode.