ZyXEL NBG6615 User Guide - Page 57
General Wireless LAN Screen
View all ZyXEL NBG6615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Chapter 6 Wireless LAN 6.4 General Wireless LAN Screen Use this screen to enable the Wireless LAN, enter the SSID and select the wireless security mode. Note: If you are configuring the NBG6615 from a computer connected to the wireless LAN and you change the NBG6615's SSID, channel or security settings, you will lose your wireless connection when you press Apply to confirm. You must then change the wireless settings of your computer to match the NBG6615's new settings. Click Network > Wireless LAN (2.4G/5G) to open the General screen. Figure 34 Network > Wireless LAN (2.4G/5G) > General (Router or Access Point Mode) The following table describes the general wireless LAN labels on this screen. Table 13 Network > Wireless LAN > General LABEL DESCRIPTION Enable Wireless Click the check box to activate wireless LAN. LAN 802.11 Mode Click the drop-down list to choose the 802.11 mode you want to operate. Name (SSID) The Service Set Identity (SSID)identifies the Service Set with which a wireless station is associated. Wireless stations associating to the access point (AP) must have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN. Enable SSID Broadcast Select the Enable SSID Broadcast check box to enable the SSID in the outgoing beacon frame so a station cannot obtain the SSID through scanning using a site survey tool. NBG6615's User's Guide 57