ZyXEL NBG6615 User Guide - Page 138
Wireless Problems
View all ZyXEL NBG6615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Chapter 23 Troubleshooting 23.5 Wireless Problems I cannot access the NBG6615 or ping any computer from the WLAN. 1 Make sure the wireless LAN is enabled on the NBG6615. 2 Make sure the wireless adapter on the wireless station is working properly. 3 Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports the same wireless standard as the NBG6615. 4 Make sure your computer (with a wireless adapter installed) is within the transmission range of the NBG6615. 5 Check that both the NBG6615 and your wireless station are using the same wireless and wireless security settings. 6 Make sure traffic between the WLAN and the LAN is not blocked by the firewall on the NBG6615. 7 Make sure you allow the NBG6615 to be remotely accessed through the WLAN interface. Check your remote management settings. • See Chapter 6 Wireless LAN for more information. I cannot access the Web Configurator after I switched to a non-router mode. When you change from router mode to a non-router mode, you must manually give your computer an IP address in the range between 192.168.1.3 and 192.168.1.254 as non-router mode has no LAN DHCP server. Refer to Appendix C on page 157 for instructions on how to change your computer's IP address. NBG6615's User's Guide 138