ZyXEL PLA491 User Guide - Page 63

Troubleshooting, PLA-4xx Series, Configuration Utility, Network Name

Get ZyXEL PLA491 PDF manuals and user guides View all ZyXEL PLA491 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

Chapter 6 Powerline Network Setup Tutorial Figure 45 Adapters on a New Powerline Network • If you want to access any of your new powerline networks using the PLA-4xx Series Configuration Utility, change the Network Name on your local adapter to the network name for the network you want to access. The adapters on that network will then display in the adapter table, allowing you to select and configure each one. 6.2 Troubleshooting The HomePlug ( ) LED (light) should light up on your adapter when it successfully connects to other adapters on your network. If it does not, try the following measures. • Make sure the adapter is plugged in to a power socket and the power socket is turned on. • Check you have entered the correct network name for your network. • Check your powerline adapter is connected to the same electrical circuit as other powerline adapters on your network. PLA-4xx Series User's Guide 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Chapter 6 Powerline Network Setup Tutorial
PLA-4xx Series User’s Guide
63
Figure 45
Adapters on a New Powerline Network
•
If you want to access any of your new powerline networks using the
PLA-4xx Series
Configuration Utility
, change the
Network Name
on your local adapter to the network
name for the network you want to access. The adapters on that network will then display
in the adapter table, allowing you to select and configure each one.
6.2
Troubleshooting
The HomePlug (
) LED (light) should light up on your adapter when it successfully
connects to other adapters on your network. If it does not, try the following measures.
•
Make sure the adapter is plugged in to a power socket and the power socket is turned on.
•
Check you have entered the correct network name for your network.
•
Check your powerline adapter is connected to the same electrical circuit as other
powerline adapters on your network.