ZyXEL PLA491 User Guide - Page 83
Wall-mounting Instructions, mbps, HAIR DRYER, CONNECTED, 56mbps
View all ZyXEL PLA491 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Appendix A Product Specifications Figure 50 Electromagnetic Interference (EMI) HAIR DRYER CONNECTED HAIR DRYER DISCONNECTED NO EMI FILTER 50-60mbps 50-60mbps HAIR DRYER CONNECTED WITH EMI FILTER 46-56mbps 20-30mbps HOMEPLUG AV BITRATE APPLIANCE WITHOUT EMI FILTER APPLIANCE WITH EMI FILTER Wall-mounting Instructions Complete the following steps to hang your PLA-400/400 v2/401/401 v2/402 v2/470/470 v2/ 491 on a wall. " See Table 17 on page 79 for the size of screws to use and how far apart to place them. 1 Select a high position on a sturdy wall that is free of obstructions. 2 Drill two holes for the screws. The distance between the centers of the holes is listed in the product specifications appendix. 1 Be careful to avoid damaging pipes or cables located inside the wall when drilling holes for the screws. 3 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall. 4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of the PLA-4xx with the connection cables. 5 Align the holes on the back of the PLA-4xx with the screws on the wall. Hang the PLA4xx on the screws. PLA-4xx Series User's Guide 83