Home » ZyXEL Manuals » Networking » ZyXEL V310 » Manual Viewer

ZyXEL V310 User Guide - Page 37

Table 5, DESCRIPTION

Get ZyXEL V310 PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Chapter 4 Using the LCD Screen Table 5 LCD Menu Overview (continued) MENU DESCRIPTION Alarm Time Use this menu to turn on the V310's built-in clock alarm and configure the time the alarm is triggered. Repeat Use this menu to ring the alarm at a specific time every day. Description Use this menu to set a descriptive name for the alarm, which will display on the LCD screen. Network Settings Network Status Use this menu to see the IP address, subnet mask, gateway, and DNS settings currently assigned to the V310, and the MAC (Media Access Control) address. Network Protocol Use this menu to set the network protocol (IPv4, IPv6 or IPv4/ IPv6) supported by the V310. LAN Port Setup Use this menu to set the V310 to get an IP address automatically or give V310 a static IP address or configure your PPPoE user name and password. PC Port Setup Use this menu to enable NAT and configure the IP address for the V310's PC port. Bridge Setup Use this menu to set whether the V310 works as a bridge or can be a DHCP server. VLAN Setting Use this menu to configure the V310's voice VLAN ID and priority. DNS Setting Use this menu to set the IP addresses of the DNS servers used by the V310. DHCP Server Use this menu to set the range of the IP addresses and DNS server information that the V310 assigns to the DHCP clients when it acts as a DHCP server. NTP & Time Use this menu to have the V310 get the time and date from a NTP time server. IPv6 Setting Use this menu to configure how the V310 obtains an IPv6 address. IEEE 802.1x Use this menu to enable and configure the IEEE 802.1x settings. Daylight Saving Use this menu to configure the date and time when Daylight Saving Time starts. Save & Restart Use this menu to save your new network settings and restart the network. SIP Settings Port Setting Use this menu to set the SIP listening port number and RTP port number. Codec Setting Use this menu to set the priority of voice codec. RTP Packet Size Use this menu to set the RTP packer size for a voice codec. RFC2833 Payload Use this menu to set the RFC2833 payload number. Save Use this menu to save your new SIP settings. SIP Accounts Setup Use this menu to configure an existing Voice over Internet (VoIP) account. New Use this menu to create a new Voice over Internet (VoIP) account. Delete Use this menu to remove a Voice over Internet (VoIP) account. System Settings Date/Time Use this menu to set the V310's date and time manually. Version Use this menu to see the version number of the firmware the V310 is currently using. Serial Number Use this menu to see the serial number of the V310. V310 User's Guide 37

Section	Page
V310	1
Contents Overview	3
Table of Contents	5
User’s Guide	11
Introducing the V310	13
1.1 Overview	13
1.2 Applications	13
1.2.1 Make Calls via Internet Telephony Service Provider	13
1.2.2 Make Calls via IP-PBX	14
1.2.3 Make Peer-to-Peer Calls	15
1.3 Ways to Manage the V310	15
1.4 Good Habits for Managing the V310	15
Hardware	16
2.1 Overview	16
2.2 Physical Features	16
2.2.1 The LCD Screen	19
2.3 Phone Functions	20
2.3.1 Making a Call	20
2.3.2 Receiving a Call	20
2.3.3 Ending a Call	20
2.3.4 Changing the Volume	21
2.3.5 Muting a Call	21
2.3.6 Placing a Call on Hold	21
2.3.7 Using Voicemail	21
2.3.8 Making Conference Calls	21
2.3.9 Transferring a Call	22
Tutorials	23
3.1 Overview	23
3.2 Setting Up a Network Connection	24
3.3 Configuring VoIP Options	27
3.4 Placing a Call	29
3.4.1 Receiving an Incoming Call on a 2nd Line	29
3.5 Making a Conference Call	30
3.6 Retrieving Voice Mail	31
3.7 Setting the Time on Your V310	31
Technical Reference	33
Using the LCD Screen	35
4.1 Overview	35
4.2 Navigation	35
4.3 Entering Numbers, Letters and Symbols	35
4.4 LCD Menu Overview	36
4.5 The LCD Status Screen	38
4.6 Entering the Menu System	38
Phonebook and Call History	39
5.1 Overview	39
5.1.1 What You Can Do in This Chapter	39
5.2 View Phonebook Contacts	39
5.3 Add a Phonebook Entry	40
5.4 Search for a Phonebook Contact	40
5.5 Delete a Phonebook Contact	41
5.6 Call a Phonebook Contact	42
5.7 View Calls Logs	42
Phone Settings and Alarm Clock	44
6.1 Overview	44
6.1.1 What You Can Do in This Chapter	44
6.2 The Always Forward Menu	44
6.3 The Busy Forward Menu	45
6.4 The No Answer Forward Menu	45
6.5 The Speed Dial Menu	46
6.6 The Auto Answer Menu	46
6.7 The Ring Tone Menu	47
6.8 The Music On Hold Menu	47
6.9 The Language Menu	48
6.10 The Alarm Clock Menu	48
Network Settings	49
7.1 Overview	49
7.1.1 What You Can Do in This Chapter	49
7.2 The Network Status Menu	49
7.3 The Network Protocol Menu	50
7.4 The WAN Setup Menu	50
7.5 The LAN Setup Menu	51
7.6 The Bridge Setup Menu	51
7.7 The VLAN Setting Menu	52
7.8 The DNS Setting Menu	52
7.9 The DHCP Server Menu	53
7.10 The NTP & Time Menu	53
7.11 The IPv6 Setting Menu	53
7.12 The IEEE 802.1x Menu	54
7.13 The Daylight Saving Menu	54
SIP Settings and SIP Accounts	56
8.1 Overview	56
8.1.1 What You Can Do in This Chapter	56
8.2 The Port Setting Menu	56
8.3 The Codec Setting Menu	57
8.4 The RTP Packet Size Menu	57
8.5 The RFC2833 Payload Menu	57
8.6 The SIP Account Setup Menu	58
8.7 The SIP Account New Menu	58
8.8 The SIP Account Delete Menu	59
System Settings	60
9.1 Overview	60
9.1.1 What You Can Do in This Chapter	60
9.2 The Date/Time Menu	60
9.3 The Version Menu	61
9.4 The Serial Number Menu	61
9.5 The Factory Reset Menu	62
9.6 The Reboot Menu	62
The Web Configurator	63
10.1 Overview	63
10.2 Accessing the Web Configurator	63
10.2.1 Navigation Panel	64
10.2.2 Main Window	65
The Dashboard Screen	67
11.1 Overview	67
11.1.1 What You Can Do in this Chapter	67
11.2 Dashboard Screen	67
Monitor	69
12.1 Overview	69
12.1.1 What You Can Do in this Chapter	69
12.2 Call History	69
12.2.1 Missed Calls	69
12.2.2 Answered Calls	70
12.2.3 Dialed Calls	71
Network Setup	73
13.1 Overview	73
13.1.1 What You Can Do in This Chapter	73
13.1.2 What You Need to Know About Network Setup	73
13.2 LAN Port Settings	74
13.2.1 IPv4 Settings	75
13.2.2 IPv6 Settings	77
13.3 PC Port Settings	78
13.4 NTP & Time Settings	79
13.5 Routing Table	81
13.6 SNMP	82
Phone	85
14.1 Overview	85
14.1.1 What You Can Do in this Chapter	85
14.2 Phone Book	86
14.3 Alarm Clock	87
14.4 Call Forward	88
14.5 Speed Dial	89
14.6 Ring Tone	90
14.7 Dial Plan	91
14.7.1 Add/Edit Dial Plan	92
14.8 Voice Settings	93
VPN	95
15.1 Overview	95
15.1.1 PPTP	95
15.1.2 IPSec	96
15.1.3 What You Can Do in This Chapter	96
15.1.4 What You Need to Know About IPSec VPN Setup	96
15.2 IPSec VPN	98
15.2.1 IPSec VPN Advanced	100
15.3 PPTP	101
SIP Global Settings and SIP Accounts	103
16.1 Overview	103
16.1.1 What You Can Do in This Chapter	103
16.1.2 What You Need to Know About Network Setup	103
16.2 SIP Port Settings	109
16.3 SIP Codec Settings	110
16.4 SIP Other Settings	111
16.5 SIP Accounts	112
16.5.1 SIP Account Configuration	112
Maintenance	117
17.1 Overview	117
17.1.1 What You Can Do in This Chapter	117
17.2 Auto Configuration	118
17.3 Upgrade Firmware	119
17.4 Backup/Recover	120
17.4.1 Backup Configuration	120
17.4.2 Restore Configuration	121
17.5 System Authority	121
17.6 Factory Defaults	122
17.7 Reboot System	122
Troubleshooting	125
18.1 Overview	125
18.2 Power, Hardware Connections, and LEDs	125
18.3 Internet Access	127
18.4 Phone Calls and VoIP	128
Setting Up Your Computer’s IP Address	131
Pop-up Windows, JavaScripts and Java Permissions	159
Legal Information	171

Match case Limit results 1 per page

Chapter 4 Using the LCD Screen

V310 User’s Guide

Alarm Time

Use this menu to turn on the V310’s built-in clock alarm and

configure the time the alarm is triggered.

Repeat

Use this menu to ring the alarm at a specific time every day.

Description

Use this menu to set a descriptive name for the alarm, which will

display on the LCD screen.

Network Settings

Network Status

Use this menu to see the IP address, subnet mask, gateway, and

DNS settings currently assigned to the V310, and the MAC (Media

Access Control) address.

Network Protocol

Use this menu to set the network protocol (IPv4, IPv6 or IPv4/

IPv6) supported by the V310.

LAN Port Setup

Use this menu to set the V310 to get an IP address automatically

or give V310 a static IP address or configure your PPPoE user

name and password.

PC Port Setup

Use this menu to enable NAT and configure the IP address for the

V310’s PC port.

Bridge Setup

Use this menu to set whether the V310 works as a bridge or can be

a DHCP server.

VLAN Setting

Use this menu to configure the V310’s voice VLAN ID and priority.

DNS Setting

Use this menu to set the IP addresses of the DNS servers used by

the V310.

DHCP Server

Use this menu to set the range of the IP addresses and DNS server

information that the V310 assigns to the DHCP clients when it acts

as a DHCP server.

NTP & Time

Use this menu to have the V310 get the time and date from a NTP

time server.

IPv6 Setting

Use this menu to configure how the V310 obtains an IPv6 address.

IEEE 802.1x

Use this menu to enable and configure the IEEE 802.1x settings.

Daylight Saving

Use this menu to configure the date and time when Daylight

Saving Time starts.

Save & Restart

Use this menu to save your new network settings and restart the

network.

SIP Settings

Port Setting

Use this menu to set the SIP listening port number and RTP port

number.

Codec Setting

Use this menu to set the priority of voice codec.

RTP Packet Size

Use this menu to set the RTP packer size for a voice codec.

RFC2833 Payload

Use this menu to set the RFC2833 payload number.

Save

Use this menu to save your new SIP settings.

SIP Accounts

Setup

Use this menu to configure an existing Voice over Internet (VoIP)

account.

New

Use this menu to create a new Voice over Internet (VoIP) account.

Delete

Use this menu to remove a Voice over Internet (VoIP) account.

System Settings

Date/Time

Use this menu to set the V310’s date and time manually.

Version

Use this menu to see the version number of the firmware the V310

is currently using.

Serial Number

Use this menu to see the serial number of the V310.

Table 5

LCD Menu Overview

(continued)

DESCRIPTION