ZyXEL X650 User Guide - Page 82
Here are descriptions of each setup item
View all ZyXEL X650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
1 2 3 4 5 6 7 8 Here are descriptions of each setup item: Band (2): Select the band you want to use (all the wireless routers must use the same settings). Channel Number (3): Select the channel you want to use (all the wireless routers must use the same settings). MAC address 1 to 4 (4 - 7): Input the MAC address(es) of other wireless router(s). Security Setting (8): Click to set security settings for this connection (Please go to section '8.3 Wireless Security' for detailed instructions). 8.1.5 Setup procedure for 'AP Bridge - WDS' In this mode, you can expand the scope of network by combining up to four other access points together while still allowing every access point to accept wireless clients. 80
80
Here are descriptions of each setup item:
Band (2):
Select the band you want to use (all the wireless routers
must use the same settings).
Channel
Select the channel you want to use (all the wireless
Number (3):
routers must use the same settings).
MAC address
Input the MAC address(es) of other wireless router(s).
1 to 4 (4 - 7):
Security
Click to set security settings for this connection
Setting (8):
(Please go to section ‘8.3 Wireless Security’
for detailed instructions).
8.1.5 Setup procedure for ‘AP Bridge – WDS’
In this mode, you can expand the scope of network by combining up to four
other access points together while still allowing every access point to accept
wireless clients.
1
2
3
4
5
6
7
8