ZyXEL X650 User Guide - Page 84
Associated Clients 5:Click 'Show Active Clients' button, then an Active
View all ZyXEL X650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
SSID (3): Input the SSID of your wireless router (the setting should be the same with other wireless routers for the convenience of roaming). Channel Number (4): Select the channel you want to use (all the wireless routers must use the same settings). Associated Clients (5):Click 'Show Active Clients' button, then an "Active Wireless Client Table" will pop up. Here you can see the status of all active wireless stations connected to the access point. MAC address 1 to 4 (6 - 9): Input the MAC address of other wireless routers. Security Setting (10): Click to set security settings for this connection (Please go to section '8.3 Wireless Security' for detailed instructions). 8.1.6 Setup procedure for 'Universal Repeater' In this mode, the X650 can act as a wireless repeater; it can be a Station and AP at the same time. It can use its Station function to connect to a Root AP and use its AP function to service all wireless stations within its coverage. NOTE: For Repeater Mode, this router will demodulate the received signal, checking if this signal is noise for the operating network, then have the signal modulated and amplified again. The output power of this mode is the same as that of WDS and normal AP mode. 82