2010 Chevrolet Traverse Owner's Manual - Page 11

In Brief 1-5 Remote Vehicle Start Starting the Vehicle 1. Aim the RKE transmitter at the vehicle. 2. Press Canceling a Remote Start To cancel a remote start: . Power Door Locks On vehicles with power door locks, the controls are located on the front doors. Q. Aim the RKE transmitter at the vehicle and press and hold / until the parking lamps turn off. Turn on the hazard warning flashers. Turn the ignition switch on and then off. . " (Unlock): Press to unlock the doors. Q (Lock): Press to lock the doors. See Power Door Locks on page 2‑7 3. Immediately after completing Step 2, press and hold / until the parking lamps flash. When the vehicle starts, the parking lamps will turn on and remain on as long as the engine is running. The doors will be locked and the climate control system may come on. The engine will continue to run for 10 minutes. Repeat the steps for a 10-minute time extension. Remote start can be extended only once. . See Remote Vehicle Start on page 2‑5. Liftgate To open the liftgate the vehicle must be in P (Park). Press the touchpad under the liftgate handle. To close the liftgate, use the pull cup or pull strap as an aid. Door Locks To lock or unlock a door manually: . From the inside use the door lock knob on the window sill. From the outside turn the key toward the front or rear of the vehicle, or press the Q or " button on the Remote Keyless Entry (RKE) transmitter. .