2010 Chevrolet Traverse Owner's Manual - Page 315

Vehicle Care 10-5 Hood To open the hood, do the following: 2. At the front of the vehicle, pull up on the center of the hood, and push the secondary hood release to the right. 3. After you have partially lifted the hood, gas struts will automatically take over to lift and hold the hood in the fully open position. 1. Pull the hood release handle with this symbol on it. It is located under the instrument panel on the driver's side of the vehicle. Before closing the hood, be sure all filler caps are on properly. Pull the hood down to close. Lower the hood until the lifting pressure of the strut is reduced. Then allow the hood to fall and latch into place under its own weight. Check to make sure the hood is closed. If the hood does not fully latch, gently push the hood down at the front and center of the hood until it is completely latched.