2010 Chevrolet Traverse Owner's Manual - Page 373

Vehicle Care 21. Dispose of the used sealant canister (E) and sealant/air hose (F) assembly at a local dealer/retailer or in accordance with local state codes and practices. 22. Replace it with a new canister available from your dealer/ retailer. 23. After temporarily sealing a tire using the tire sealant and compressor kit, take the vehicle to an authorized dealer/ retailer within a 100 miles (161 km) of driving to have the tire repaired or replaced. 10-63 Always do a safety check first. See If a Tire Goes Flat on page 10‑56. 1. Remove the tire sealant and compressor kit from its storage location. See Storing the Tire Sealant and Compressor Kit on page 10‑65. 2. Unwrap the air only hose (G) and the power plug (H). Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured) To use the air compressor to inflate a tire with air only and not sealant: