2010 Chevrolet Traverse Owner's Manual - Page 376

10-66 Vehicle Care Tire Changing Removing Tools The tools needed to remove the spare tire are located in the storage compartment on the driver side, at the rear of the vehicle. 1. Open the jack storage compartment by pulling on the latch tab, located toward the rear of the vehicle, and pulling the cover off. 1. Press down on the latch tab and pull the cover off to access the storage compartment. 2. Press the two tabs on the quick release buckle to release the tire sealant and compressor kit strap. 3. Remove the sealant and compressor kit from its tray. To store the tire sealant and compressor kit, reverse the steps. A. Tool Bag B. Wing Bolt C. Jack 2. Remove the wing bolt (B) by turning it counterclockwise 3. Push the jack (C) up out of the holding bracket. 4. Turn the jack on its side, with the bottom facing toward you. 5. Pull the jack straight out, bottom first.