2011 Chevrolet Cruze Owner's Manual - Page 186

7-32 Infotainment System . Using the "Re‐dial" Command 1. Press b / g. For vehicles with a navigation system, say "Hands Free," after the tone. 2. After the tone, say "Re‐dial." Once connected, the person called will be heard through the audio speakers. Press b / g again to return to the original call. To ignore the incoming call, no action is required. Press $ / i to disconnect the current call and switch to the call on hold. Ending a Call Press . $ / i to end a call. Muting a Call During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them. To mute a call, press b / then say "Mute Call." . Three‐Way Calling Three‐way calling must be supported on the cell phone and enabled by the wireless service carrier. 1. While on a call, press 2. Say "Three‐way Call." 3. Use the dial or call command to dial the number of the third party to be called. 4. Once the call is connected, press b / g to link all callers together. Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle... g, and g, and To cancel mute, press b / then say "Un‐mute Call." b / g to answer the call. Press $ / i to ignore a call. Press b / g. Transferring a Call Audio can be transferred between the Bluetooth system and the cell phone. The cell phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the ignition is turned to ON/RUN. Call Waiting Call waiting must be supported on the cell phone and enabled by the wireless service carrier. . Press b / g to answer an incoming call when another call is active. The original call is placed on hold.