2011 Chevrolet Cruze Owner's Manual - Page 322

10-76 Vehicle Care Notice: Wheel covers will not fit on the vehicle's compact spare. If you try to put a wheel cover on the compact spare, the cover or the spare could be damaged. Storing a Flat or Spare Tire and Tools { WARNING Front Jack Cover Shown, Rear Jack Cover Similar 19. If this vehicle is the RS model, snap the jack cover back into place. 20. Remove the wheel blocks and return them to their proper storage location. When reinstalling the wheel cover or center cap on the full-size tire, tighten all five plastic caps hand snug with the aid of the wheel wrench and tighten them with the wheel wrench an additional one‐quarter of a turn. Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. Storing the Flat Tire and Tools 1. Replace the wheel wrench and wheel blocks in the tool bag. 2. Remove the foam container from the rear storage compartment. 3. Place the flat tire in the storage compartment with the valve stem down. 4. Place the jack and jack handle extension in the foam container. 5. Place the foam container inside the flat tire. Align the hole with the stow rod. 6. Place the tool bag tether over the stow rod.