2011 Chevrolet Cruze Owner's Manual - Page 275

Vehicle Care High‐Beam Headlamp/ Low‐Beam Headlamp and DRL 1. Open the hood. See Hood on page 10‑4. 3. Disconnect the wiring harness connector from the bulb (C) by pressing the connector release (B) and pulling straight back. 4. Remove the bulb (C) from the headlamp assembly by turning counterclockwise and pulling straight back. 5. Install the new bulb in the headlamp assembly by turning clockwise. 6. Install the wiring harness connector to the bulb. Be sure the connector release (B) locks into place. 2. Remove the connector retaining tab (A). 7. Install the connector retaining tab (A). 10-29 Parking/Turn Signal Lamp 1. Open the hood. See Hood on page 10‑4. 2. Remove the parking/turn signal lamp bulb socket from the headlamp assembly by turning counterclockwise.