2011 Chevrolet Cruze Owner's Manual - Page 279

Vehicle Care 8. Install the taillamp assembly and tighten the two screws. 9. Close the two screw covers. 10-33 Replacement Bulbs Exterior Lamp Back-Up Lamp Front and Rear Sidemarker Lamp Front Parking/Turn Signal Lamp High Beam/Low Beam and DRL Headlamp Rear Turn Signal Lamp Stop Lamp/Taillamp Bulb Number 921K 194 7444NA H13LL 7443NA 3057K LCP License Plate Lamp To replace the license plate lamp bulb: 2. Turn and pull the license plate lamp assembly down. 3. Turn the bulb socket counterclockwise and pull the bulb straight out of the socket. 4. Push the new bulb into the socket. 1. Remove the two screws from the license plate lamp assembly. 5. Install the bulb socket by turning clockwise into the license plate lamp assembly. 6. Replace the license plate lamp assembly by using the two screws to secure. For replacement bulbs not listed here, contact your dealer.