2011 Chevrolet Cruze Owner's Manual - Page 48

2-18 Keys, Doors and Windows Sunshade The sunshade is manually operated. Close or open the sunshade by sliding. When the sunroof is opened, the sunshade is always open. Safety Function If the sunroof has any resistance during automatic closing, it will immediately stop and reverse. To override the safety function, press and hold the close sunroof switch. The sunroof closes without the safety function. To stop the movement, release the switch. Initializing the Sunroof If the sunroof cannot be fully closed, or the express open or close feature does not function, the sunroof may need to be initialized. This can happen if the battery has been disconnected or the sunroof has been serviced. To initialize the sunroof: 1. Press the close sunroof switch to the first detent position. Hold the switch in this position for 10 seconds after the sunroof has fully closed. 2. Press the open sunroof switch to the first detent position. Release the switch when the sunroof is fully opened. 3. Press the open sunroof switch to the first detent position and hold for 10 seconds. The sunroof will automatically close. The switch can be released when the sunroof stops. Dirt and debris may collect on the sunroof seal or in the track. This could cause an issue with sunroof operation, noise, or plugging within the water drainage system. Periodically open the sunroof and remove any obstacles or loose debris. Wipe the sunroof seal and roof sealing area using a clean cloth, mild soap, and water. Do not remove grease from the sunroof.