2011 Chevrolet Silverado 1500 Regular Cab Owner's Manual - Page 128

3-62 Seats and Restraints 2. See Securing Child Restraints (Rear Seat Position) on page 3‑65 or Securing Child Restraints (Center Front Seat Position) on page 3‑67 or Securing Child Restraints (Right Front Seat Position) on page 3‑67 for instructions on installing the child restraint using the safety belts. 3. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child restraint at the LATCH path and attempt to move it side‐to‐side and back‐and‐forth. There should be no more than 2.5 cm (1 in) of movement for proper installation. Crew and Extended Cab Models 1. Attach and tighten the lower attachments to the lower anchors. If the child restraint does not have lower attachments or the desired seating position does not have lower anchors, secure the child restraint with the top tether and the safety belts. Refer to your child restraint manufacturer instructions and the instructions in this manual. 1.1. Find the lower anchors for the desired seating position. 1.2. Put the child restraint on the seat. 1.3. Attach and tighten the lower attachments on the child restraint to the lower anchors. If the position you are using has an adjustable headrest or head restraint and you are using a single tether, raise the headrest or head restraint and route the tether under the headrest or head restraint and in between the headrest or head restraint posts.