2011 Chevrolet Silverado 1500 Regular Cab Owner's Manual - Page 498

10-92 Vehicle Care To store the jack and jack tools: G. Jack H. Bolt Retaining Wheel Blocks 1. Put the tools (D) in the tool bag (E) and place them in the retaining bracket (C). 2. Tighten down the wing nut (C). 3. Assemble the wheel blocks (B) and jack (G) together with the wing nut (A) and retaining bolt (H). 4. Position the jack (G) in the mounting bracket (F). Position the holes in the base of the jack (G) onto the pin in the mounting bracket (F). 5. Return them to their original location in the vehicle. For more information, refer to "Removing the Spare Tire and Tools" for more information. 6. Raise the tire fully against the underside of the vehicle by turning the wheel wrench clockwise until you hear two clicks or feel it skip twice. You cannot overtighten the cable. A. Wing Nut Retaining Wheel Blocks B. Wheel Blocks C. Wing Nut Retaining Tool Kit 7. Make sure the tire is stored securely. Push, pull (A), and then try to turn (B) the tire. If the tire moves, use the wheel wrench to tighten the cable. 8. Reinstall the spare tire lock, if the vehicle has one. D. Wheel Wrench and Extensions E. Tool Bag F. Jack Mounting Bracket