2011 Chevrolet Silverado 1500 Regular Cab Owner's Manual - Page 271

Infotainment System To hear all of the numbers recognized by the system, say "Verify" at any time. 1. Press and hold two seconds. 2. Say "Digit Dial." 3. Say each digit, one at a time, that you want to dial. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say "Dial." Once connected, the person called will be heard through the audio speakers. Using the "Re‐dial" Command 1. Press and hold two seconds. . 7-53 Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle... Three‐Way Calling Three‐way calling must be supported on the cell phone and enabled by the wireless service carrier. 1. While on a call, press 2. Say "Three‐way call." 3. Use the dial or call command to dial the number of the third party to be called. 4. Once the call is connected, press b / g to link all callers together. b / g for b / g to answer the call. Press c / x to ignore a call. Press b / g. Call Waiting Call waiting must be supported on the cell phone and enabled by the wireless service carrier. . Press b / g to answer an incoming call when another call is active. The original call is placed on hold. Press b / g again to return to the original call. To ignore the incoming call, no action is required. Press c / x to disconnect the current call and switch to the call on hold. Ending a Call Press c / x to end a call. b / g for . 2. After the tone, say "Re‐dial." Once connected, the person called will be heard through the audio speakers. .