2011 Chevrolet Silverado 1500 Regular Cab Owner's Manual - Page 497

Vehicle Care H. Wheel Wrench I. J. Jack Handle Extensions Spare Tire Lock (If Equipped) 10-91 1. Put the tire on the ground at the rear of the vehicle with the valve stem pointed down, and to the rear. 2. Pull the cable and spring through the center of the wheel. Tilt the wheel retainer plate down and through the center wheel. Make sure the retainer is fully seated across the underside of the wheel. 3. Attach the wheel wrench (H) and extensions (I) together, as shown. 4. Insert the hoist end (F) through the hole (G) in the rear bumper and onto the hoist shaft. Do not use the chiseled end of the wheel wrench. 5. Raise the tire part way upward. Make sure the retainer is seated in the wheel opening.