2011 Chevrolet Silverado 1500 Regular Cab Owner's Manual - Page 361

Driving and Operating screen can vary according to vehicle orientation or road conditions. The following illustration shows the field of view that the camera provides. To disconnect the camera: 1. Remove the license plate. 2. Disconnect the camera connectors from the chassis harness, located behind the license plate, by pressing on the release tab on each connector. 9-77 A. Chassis harness connector B. Release tab 4. Feed the wiring harness through the pickup box, then plug the camera connectors together to prevent contamination. A. View displayed by the camera B. Corner of the rear bumper Disconnecting the Rear Vision Camera The rear vision camera must be disconnected if the tailgate needs to be removed. A. Chassis harness connector B. Release tab C. Camera connector 3. Plug the two exposed chassis harness connectors together to prevent contamination. 5. Remove the tailgate. See Tailgate on page 2‑10 for more information. 6. Reinstall the license plate. Reverse this procedure to reinstall the rear vision camera and make sure the grommet and connection are secure.