2011 Chevrolet Silverado 1500 Regular Cab Owner's Manual - Page 205

Instruments and Controls The motor head dip switch settings can also be used when the original hand-held transmitter is not available. The switch positions on the hand-held transmitter could be labeled as follows: . . 5-61 If a switch is set between the up and down position, write "Middle." The switch settings written down in Step 2 now become the button strokes to be entered into the Universal Home Remote in Step 4. Be sure to enter the switch settings written down in Step 2, in order from left to right, into the Universal Home Remote, when completing Step 4. A switch in the up position could be labeled as Up, +, or On. A switch in the down position could be labeled as Down, −, or Off. A switch in the middle position could be labeled as Middle, 0, or Neutral. . Example of Eight Dip Switches with Two Positions . 2. Write down the 8 to 12 switch settings from left to right as follows: . When a switch is in the up position, write "Left." When a switch is in the down position, write "Right." Example of Eight Dip Switches with Three Positions The panel of switches might not appear exactly as they do in the examples above, but they should be similar. .