2013 Chevrolet Tahoe Owner Manual - Page 178

5-56 . Instruments and Controls A switch in the down position could be labeled as Down, −, or Off. A switch in the middle position could be labeled as Middle, 0, or Neutral. to right, into the Universal Home Remote, when completing Step 4. 3. From inside your vehicle, first firmly press all three buttons at the same time for about three seconds. Release the buttons to put the Universal Home Remote into programming mode. C. Right Button (Down, −, or Off) 4. The indicator lights will blink slowly. Enter each switch setting from Step 2 into your vehicle's Universal Home Remote. You will have two and one-half minutes to complete Step 4. Now press one button on the Universal Home Remote for each switch setting as follows: . . 2. Write down the 8 to 12 switch settings from left to right as follows: . When a switch is in the up position, write "Left." When a switch is in the down position, write "Right." If a switch is set between the up and down position, write "Middle." The switch settings written down in Step 2 now become the button strokes to be entered into the Universal Home Remote in Step 4. Be sure to enter the switch settings written down in Step 2, in order from left . If you wrote "Left," press the left button (A) in the vehicle. If you wrote "Right," press the right button (C) in the vehicle. If you wrote "Middle," press the middle button (B) in the vehicle. . . . A. Left Button (Up, +, or On) B. Middle Button (Middle, 0, or Neutral) 5. After entering all of the switch positions, once again firmly press and release all three buttons at the same time. The indicator lights will turn on.