2013 Chevrolet Tahoe Owner Manual - Page 325

Driving and Operating 4. Reapply the brake pedal. Then apply the parking brake and shift into P (Park). 5. Release the brake pedal. lubricant, belts, cooling system, and brake system. It is a good idea to inspect these before and during the trip. Check periodically to see that all hitch nuts and bolts are tight. 9-65 WARNING (Continued) seriously injured. The vehicle may also be damaged; the resulting repairs would not be covered by the vehicle warranty. Pull a trailer only if all the steps in this section have been followed. Ask your dealer for advice and information about towing a trailer with the vehicle. Notice: Pulling a trailer improperly can damage the vehicle and result in costly repairs not covered by the vehicle warranty. To pull a trailer correctly, follow the advice in this section and see your dealer for important information about towing a trailer with the vehicle. Leaving After Parking on a Hill 1. Apply and hold the brake pedal. 2. Start the engine. 3. Shift into a gear. 4. Release the parking brake. 5. Let up on the brake pedal. 6. Drive slowly until the trailer is clear of the chocks. 7. Stop and have someone pick up and store the chocks. Trailer Towing If the vehicle has a hybrid engine, see the Hybrid supplement for more information. Do not tow a trailer during break-in. See New Vehicle Break-In on page 9‑20 for more information. { WARNING The driver can lose control when pulling a trailer if the correct equipment is not used or the vehicle is not driven properly. For example, if the trailer is too heavy, the brakes may not work well - or even at all. The driver and passengers could be (Continued) Maintenance when Trailer Towing The vehicle needs service more often when pulling a trailer. See Maintenance Schedule on page 11‑2. Things that are especially important in trailer operation are automatic transmission fluid, engine oil, axle