2013 Chevrolet Tahoe Owner Manual - Page 373

Vehicle Care Rear Wiper Blade Replacement 1. Lift the wiper blade assembly up and out of the park rest position. 10-31 2. Squeeze the grooved areas on each side of the blade, and turn the blade assembly away from the arm connector. 2. Pull the wiper blade assembly away from the backglass. The backglass wiper blade will not lock in a vertical position, so care should be used when pulling it away from the vehicle. 3. Install the new blade onto the arm connector and make sure the grooved areas are fully set in the locked position. For the proper type and size, see Maintenance Replacement Parts on page 11‑14. 3. Turn the wiper blade assembly, and pull it off of the wiper arm. Hold the wiper arm in position and push the blade away from the wiper arm. 4. Replace the wiper blade. 5. Return the wiper blade assembly to the park rest position. Glass Replacement If the windshield or front side glass must be replaced, see your dealer to determine the correct replacement glass.