2013 Chevrolet Tahoe Owner Manual - Page 71

Seats and Restraints 3-15 { WARNING If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatbacks to be sure they are locked. 6. Push and pull on the seatback to make sure it is locked. 2. Slide the front outboard seat wheels into the track on the floor and roll the seat forward. The front latches should lock into place. If the latches do not lock, try tilting the rear of the seat upward slightly. 3. Lower the rear of the seat and push down on the seat to engage the rear floor latches. Removing the Third Row Seat To remove the seat: 1. Open the liftgate to access the controls for the seat. 2. Fold the seatbacks forward using lever "1" and the instructions listed previously under "Folding the Seatback." The seat cannot be unlatched from the floor unless the seatback is folded. 3. Unlatch the seat from the floor by pulling the handle at the rear of the seat "3 Removal Only" toward the rear of the vehicle. 4. Roll the seat out of the vehicle. There is a track in the floor to guide the seat wheels out of the vehicle. { WARNING A seat that is not locked into place properly can move around in a collision or sudden stop. People in the vehicle could be injured. Be sure to lock the seat into place properly when installing it. 4. Push and pull on the seat to make sure it is locked into place. The seatback cannot be raised to the upright position unless the seat is latched to the floor. Installing the Third Row Seat To install the seat: 1. Open the liftgate to access the rear of the vehicle.