2013 Chevrolet Tahoe Owner Manual - Page 375

Vehicle Care To replace one of these bulbs: 1. Open the liftgate. See Liftgate on page 2‑9. 5. Pull the old bulb straight out from the bulb socket. 6. Press a new bulb into the bulb socket and install the socket into the taillamp assembly by turning it clockwise. 7. Reinstall the taillamp assembly. When reinstalling, make sure to line up the pins on the taillamp assembly with the vehicle. If this is not done, the taillamp assembly will not be able to be installed correctly. 10-33 License Plate Lamp 2. Remove the two screws from the taillamp assembly. 3. Pull the taillamp assembly rearward disengaging the two outer pins on the taillamp assembly from the vehicle. 4. Turn the bulb socket counterclockwise to remove it from the taillamp assembly. 1. Remove the two screws holding each of the license plate lamps to the molding that is part of the liftgate. 2. Twist and pull the license plate lamp assembly forward through the molding opening. 3. Remove the bulb socket from the lamp assembly by turning it counterclockwise. 4. Pull the bulb straight out of the socket and install the new bulb.