2013 Chevrolet Tahoe Owner Manual - Page 408

10-66 Vehicle Care When the vehicle has a flat tire (B), use the following example as a guide to assist in the placement of the wheel blocks (A). Tire Changing Removing the Spare Tire and Tools The equipment needed to change a flat tire is stored under the storage tray, located on the driver side trim panel, over the rear wheelhouse. A. Jack Knob B. Wing Nut Retaining the Tool Bag A. Wheel Block B. Flat Tire The following information explains how to use the jack and change a tire. Regular Wheelbase Shown, Extended Wheelbase Similar 1. Remove the tray to access the tools by pulling up on the finger depression under the jack symbol. C. Wing Nut Retaining the Wheel Blocks 2. Turn the wing nut retaining the tool bag (B) counterclockwise to remove it. 3. Turn the jack knob (A) counterclockwise to release the jack and wheel blocks from the bracket. 4. Turn the wing nut retaining the wheel blocks (C) counterclockwise to remove the wheel blocks and the wheel block retainer.