2010 Dodge Nitro Owner Manual - Page 199
2010 Dodge Nitro Manual
Page 199 highlights
198 UNDERSTANDING YOUR INSTRUMENT PANEL the light is flashing when the engine is running, immediate service is required and you may experience reduced performance, an elevated/rough idle or engine stall and your vehicle may require towing. The light will come on when the ignition is first turned ON and remain on briefly as a bulb check. If the light does not come on during starting, have the system checked by an authorized dealer. 16. Electronic Stability Program (ESP) Indicator Light / Traction Control System (TCS) Indicator Light The yellow Electronic Stability Program (ESP) / Traction Control System (TCS) indicator light in the speedometer area illuminates with the key in the ignition switch turned to the ON/ RUN position. It should go out with the engine running. The ЉESP/TCS Indicator LightЉ starts to flash as soon as the tires lose traction and the ESP system becomes active. The ЉESP/TCS Indicator LightЉ also flashes when TCS is active. If the ЉESP/TCS Indicator LightЉ begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. The "ESP/ TCS Indicator Light" becomes illuminated when the ESP Off button has been pressed or ESP is only partially available, caused by lack of engine management or brake thermal model. 17. Charging System Light This light shows the status of the electrical charging system. The light should come on when the ignition switch is first turned ON and remain on briefly as a bulb check. If the light stays on or comes on while driving, turn off some of the vehicle's non-essential electrical devices or increase engine speed (if at idle). If the charging system light remains on, it means that the vehicle is experiencing a problem with the charging system. Obtain SERVICE IMMEDIATELY. See an authorized dealer.