2010 Dodge Nitro Owner Manual - Page 281

280 UNDERSTANDING YOUR INSTRUMENT PANEL Operation of the system is quite simple. 1. Turn the Mode Control knob (on the right) and the The recommended setting for maximum comfort is 72°F Blower Control knob (on the left) to AUTO. (22°C) for the average person; however, this may vary. NOTE: The AUTO position performs best for front seat occupants only. NOTE: • The temperature setting can be adjusted at anytime 2. Dial in the temperature you would without affecting automatic operation. like the system to maintain by rotating the Temperature Control knob. Once • Pressing the Air Conditioning Control button while in AUTO mode will cause the LED in the control button the comfort level is selected, the systo flash three times and then turn off. This indicates tem will maintain that level automatithat the system is in AUTO mode and requesting the cally using the heating system. Should air conditioning is not necessary. the desired comfort level require air conditioning, the system will automatically make the • If your air conditioning performance seems lower than adjustment. expected, check the front of the A/C condenser located in front of the radiator for an accumulation of dirt or You will experience the greatest efficiency by simply insects. Clean with a gentle water spray from behind allowing the system to function automatically. Selecting the "O" (OFF) position on the blower control stops the system completely and closes the outside air intake.