2010 Dodge Nitro Owner Manual - Page 23

22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Pressing the LOCK button on the RKE transmitter while you are inside the vehicle will activate the Vehicle Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security Alarm. 1. Press and hold the UNLOCK button on a programmed (i.e., functional) RKE transmitter for at least four seconds, but not longer than 10 seconds. Then, press and hold the LOCK button while still holding the UNLOCK button. 2. Release both buttons at the same time. 3. Test the feature from outside the vehicle by pressing Flash Lights with Lock the LOCK and UNLOCK buttons on the RKE transmitter. The feature will cause the parking lights to flash when the doors are locked or unlocked with the RKE transmit- 4. Repeat these steps if you want to return this feature to ter. This feature can be turned on or off. To change the its previous setting. current setting, proceed as follows: NOTE: Pressing the LOCK button on the RKE transmit• On Electronic Vehicle Information Center (EVIC) ter while you are inside the vehicle will activate the equipped vehicles, refer to "Electronic Vehicle Infor- Vehicle Security Alarm. Opening a door with the Vehicle mation Center (EVIC)/Personal Settings (Customer- Security Alarm activated will cause the alarm to sound. Programmable Features)" in "Understanding Your In- Press the UNLOCK button to deactivate the Vehicle Security Alarm. strument Panel" for further information. • On non-EVIC equipped vehicles, perform the following steps: